Forging automatic feeding machine for orderly conveying of bar materials
发布时间：
2025-04-30
The forging automatic feeding machine, as its name suggests, feeds raw materials to the conveyor in a certain sequence by means of top push. During one push, the materials are heated in the induction furnace. It can be customized to an appropriate size according to the actual needs of customers. The automatic bar feeding device not only has stepless power adjustment, is simple to use, but also can save manpower and costs, and the output can be estimated. The workpieces are directly sent to the processing machinery, reducing the risks caused by manual contact.
Now let's take a look at the features of the forging automatic feeding machine:
1. The forging automatic feeding machine works based on the principle of designing a slope step approximately 2/3 of the diameter of the round bar to repeatedly lift the products upwards.
2. The forging automatic feeding machine can be directly placed on the ground by forklifts and inserted into the place. Just flip it over and it's done. Meanwhile, the floor-mounted lifting machine is also convenient for connecting with the automatic round bar discharging machine. A conveyor belt can be set up for transmission, reducing manual handling and saving labor. During this process, our company has a device that can filter out the iron chips generated by the saw band and saw blade, and then transfer the clean products to the lifting machine. This solves the problem of manual feeding. Our company customizes it according to the specific needs to facilitate the movement of the later medium-frequency furnace and the immovable foundation.
3. Due to its high height, most forging factories also have bucket elevators. Forklifts insert the material frames into the bucket elevators and rotate them to transfer the materials in the frames into the lifting machine. Previously, this mode was used. This mode requires the factory to be as high as possible and have sufficient space.
4. The discharging of the forging automatic feeding machine is generally equipped with sorting functions by medium-frequency furnaces. Mainly considering three situations: qualified, undercooled, and overheated. The rods with low temperatures are collected and can be reused later. Those with excessively high temperatures can only be scrapped. Since most medium-frequency furnaces already have this function, it will not be introduced here.
Related News
If you encounter any questions or are interested in our company's products while browsing our website, please contact us in a timely manner. We will treat every visit, phone call, email, and message with sincerity. We sincerely look forward to your visit!
Contact Us
ADD:No. 87 Huyue Road, Liuhe Economic Development Zone, Nanjing
COPYRIGHT © 2023 Nanjing Litai Intelligent Technology Co., Ltd | SEO | Powered by www.300.cn |
